2WP engaged Homewood Engineering to
test the DualKut secateur endurance.
The testing equipment ran for four weeks
until the secateur had 'cut' 999,999 times.
On 29 January 2013 we were onsite to film the 1 millionth cut.
The secateur kept cutting up to 1,214,000 times.
At this point the Ratchet torsion spring finally failed &
after removing the test DualKut secateur
& replacing the failed spring, we were able to cut some branches.
The compression spring in a conventional secateur normally achieves
between 60,000 and 80,000 cuts.
Spare Parts for PowerKut MKI, MKII, MKIII and MKIV secateurs.
Please choose from the following options.
Please note, if you require a Spring, Ratchet Pin and / or Nut,
Ratchet Bolt, circlip and washer, Hinge Bolt, circlip and washer,
these are sold as a separate Spring and Pin Kit.
Spring and Pin Kit for PowerKut MKII, MKIII & MKIV Secateur
Spare parts kit for your PowerKut secateur.
Kit includes: 2 x Springs
Instruction sheet on how to replace the spring
1 x Ratchet pin and locknut
1 x Ratchet bolt, circlip and washer
1 x Hinge bolt, circlip and washer
The Nylon Adapter is for use with our poles.
• The adapter will add even more versatility to our extension poles
by allowing you to use various homeware & outdoor hardware
products with the poles.
• The adapter has a diameter of 18mm, which is a widely used
standard for detachable/attachable products within Australia,
so many of your previously purchased homeware/hardware
products will be attachable to our poles.
• Products such as paint rollers, broom heads and mops are
attachable to the telescopic poles & are available from any
quality hardware store.
• These products in combination with the telescopic poles will
allow you to reach distances of up to 6 metres in length.
Used for dusting around the house - especially for your high ceilings.
The Indoor Duster is attachable to our Telescopic Poles,
through the use of a Nylon Adapter,
allowing for a reaching distance of up to 6 metres in length.
Professional Saw Handle to suit our high performance large branch Saw Attachment 2076S. Converts the saw to be used by hand.
Replacement Blade Kit - MK5 / DualKut / Dualkut MK6 / Daisy
Replacement anvil with nuts and screws for Power Lopper and Easy Lopper.